Dell Inspiron 3472 Service Manual Download Page 75

Page: 75 / 82

Security

Default: Enabled

PPI Bypass for Clear Command

Allows you to control the TPM
Physical Presence Interface (PPI).
When enabled, this setting will allow
the OS to skip BIOS PPI user prompts
when issuing the Clear command.
Changes to this setting take effect
immediately.
Default: Disabled

UEFI Firmware Capsule Updates

Enables you to enable or disable the
UEFI Firmware Capsule Updates
function.
Default: Enabled

Table 5. System setup options—Boot menu

Boot

Boot List Option

Displays the available boot devices.

File Browser Add Boot Option

Enables you to set the boot path in the
boot option list.

File Browser Del Boot Option

Enables you to delete the boot path in
the boot option list.

Secure Boot

Enables you to enable or disable the
secure boot control.
Default: Disabled

Boot Option Priorities

Displays the available boot devices.

Boot Option #1

Displays the first boot device.

Boot Option #2

Displays the second boot device.

Summary of Contents for Inspiron 3472



















































































Search results

Summary of Contents for Inspiron 3472

Reviews:

Related manuals for Inspiron 3472

Brands by name

Popular brands

Dell Inspiron 3472, Service Manual

Search results

Summary of Contents for Inspiron 3472

Reviews:

Related manuals for Inspiron 3472

Brands by name

Popular brands