Replacing the Computer Base
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
. After working inside your
computer, follow the instructions in
After Working Inside Your
Computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Slide the display cables and antenna cables through the cable slot on the
computer base.
2
Place the computer base on the stand assembly and align the screw
holes on the computer base with the screw holes on the stand assembly.
3
Replace the screws that secure the computer base to the stand assembly.
4
Connect the display cables to the system board.
5
Connect the antenna cables to the wireless mini-card.
Post-requisites
Replace the
base cover
.
28
Summary of Contents for Inspiron 23
Page 9: ...Getting Help and Contacting Dell 105 Self Help Resources 105 Contacting Dell 105 ...
Page 24: ...4 Lift the base cover off the computer base 1 plastic scribe 2 base cover 24 ...
Page 55: ...3 Lift the heat sink off the system board 1 captive screws 8 2 system board 3 heat sink 55 ...
Page 83: ...5 Replace the base cover 83 ...
