Dell Inspiron 23 Service Manual Download Page 93

Page: 93 / 106

Main — Memory Information

Memory Installed Indicates the amount of memory installed in MB.

Memory
Available

Indicates the amount of memory available in MB.

Memory Running
Speed

Indicates the memory speed in MHz.

Memory
Technology

Indicates the type of installed memory.

Main — SATA Information

SATA 1:

Device Type

Displays the SATA device connected to the SATA 1
connector.

Device ID

Displays the serial number of the SATA 1 device.

Device Size

Displays the size of the SATA 1 device in GB, if t=he
device is a hard drive.

mSATA:

Device Type

Displays the SATA device connected to the mSATA

connector.

Device ID

Displays the serial number of the mSATA device.

Device Size

Displays the size of the mSATA device in GB.

Advanced — Processor Configuration

Intel Hyper-

Threading
Technology

Allows you to enable or disable Intel Hyper-Threading

Technology feature for the processor — Enabled or
Disabled (Enabled by default).

Intel(R)

SpeedStep
Technology

Allows you to enable or disable Intel SpeedStep

Technology feature for the processor — Enabled or
Disabled (Enabled by default).

Intel(R)

Virtualization
Technology

Allows you to enable or disable Intel Virtualization

Technology feature for the processor — Enabled or
Disabled (Enabled by default).

CPU XD Support Allows you to enable or disable the execute disable

mode for the processor — Enabled or Disabled (Enabled
by default).

Summary of Contents for Inspiron 23











































































































Search results

Summary of Contents for Inspiron 23

Reviews:

Related manuals for Inspiron 23

Brands by name

Popular brands

Dell Inspiron 23, Service Manual

Search results

Summary of Contents for Inspiron 23

Reviews:

Related manuals for Inspiron 23

Brands by name

Popular brands