![background image](http://html.mh-extra.com/html/dell/inspiron-23/inspiron-23_service-manual_80404077.webp)
Removing the Stand Assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
. After working inside your
computer, follow the instructions in
After Working Inside Your
Computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1
Remove the
base cover
.
2
Remove the
computer base
.
3
Remove the
back cover
.
4
Remove the
camera
.
5
Remove the
microphones
.
Procedure
1
Disconnect the converter-board cable from the converter board.
2
Disconnect the display-backlight cable from the converter board.
3
Gently release the antennas from the alignment posts on the display
bezel.
77
Summary of Contents for Inspiron 23
Page 9: ...Getting Help and Contacting Dell 105 Self Help Resources 105 Contacting Dell 105 ...
Page 24: ...4 Lift the base cover off the computer base 1 plastic scribe 2 base cover 24 ...
Page 55: ...3 Lift the heat sink off the system board 1 captive screws 8 2 system board 3 heat sink 55 ...
Page 83: ...5 Replace the base cover 83 ...