Removing the Power-Button
Module
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
. After working inside your
computer, follow the instructions in
After Working Inside Your
Computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1
Remove the
base cover
.
2
Remove the
computer base
.
3
Remove the
back cover
.
Procedure
NOTE: Note the routing of the cable as you remove it so that you can
reroute it correctly after you replace the power-button module.
1
Note the power-button cable routing and remove it from the routing
guides.
2
Remove the screw that secures the power-button cable to the display
bracket.
3
Disconnect the power-button cable from the control-buttons board
cable.
4
Peel off the Mylar that covers the power button.
74
Summary of Contents for Inspiron 23
Page 9: ...Getting Help and Contacting Dell 105 Self Help Resources 105 Contacting Dell 105 ...
Page 24: ...4 Lift the base cover off the computer base 1 plastic scribe 2 base cover 24 ...
Page 55: ...3 Lift the heat sink off the system board 1 captive screws 8 2 system board 3 heat sink 55 ...
Page 83: ...5 Replace the base cover 83 ...
