Replacing the Display Panel
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
. After working inside your
computer, follow the instructions in
After Working Inside Your
Computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Place the display panel on a flat and clean surface.
2
Align the screw holes on the display-panel side-brackets with the screw
holes on the display panel.
3
Replace the screws that secure display-panel side-brackets to the display
panel.
4
Align the screw holes on the display-panel side-brackets with the screw
holes on the display bezel and place the display panel to the display
bezel.
NOTE: Make sure that no cables are under the display panel.
5
Slide the flex cables into the connectors on the display panel and press
down on the connector latches to secure the cables.
6
Replace the screws that secure the display panel to the display bezel.
7
Replace the screws that secure the display-panel bracket to the display
bezel.
Post-requisites
1
Replace the
power-button module
.
2
Replace the
stand assembly
.
3
Replace the
microphones
.
4
Replace the
camera
.
5
Replace the
back cover
.
6
Replace the
computer base
.
7
Replace the
base cover
.
88
Summary of Contents for Inspiron 23
Page 9: ...Getting Help and Contacting Dell 105 Self Help Resources 105 Contacting Dell 105 ...
Page 24: ...4 Lift the base cover off the computer base 1 plastic scribe 2 base cover 24 ...
Page 55: ...3 Lift the heat sink off the system board 1 captive screws 8 2 system board 3 heat sink 55 ...
Page 83: ...5 Replace the base cover 83 ...