Steps
Place the palm-rest and keyboard assembly on a flat and clean surface and perform the post-requisites to install the palm-rest
and keyboard assembly.
NOTE:
The replacement palm-rest and keyboard assembly will come with all four battery-screw brackets installed.
Depending on the battery configuration of your computer, slide and remove two of the four battery-screw brackets from
the palm-rest and keyboard assembly to replicate the configuration shown in the images above.
Next steps
1. Install the
.
NOTE:
The system board can be replaced with the following components pre-attached:
●
heat sink
●
memory
●
solid-state drive
2. Install the
.
3. Install the
.
4. Install the
.
5. Install the
.
6. Install the
.
7. Install the
.
8. Install the
.
9. Install the
front speakers (4-cell battery)
front speakers (6-cell battery)
, whichever applicable.
10. Install the
or
, whichever applicable.
11. Install the
12. Install the
.
13. Install the
.
After working inside your computer
.
Removing and installing components
59
