3. Lift the display board off the palm-rest and keyboard assembly.
Installing the display board
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the display board and provides a visual representation of the installation
procedure.
Steps
1. Place the display board on the palm-rest and keyboard assembly.
2. Align the screw holes on the display board with the screw holes on the palm-rest and keyboard assembly.
3. Replace the two screws (M2x2) that secure the display board to the palm-rest and keyboard assembly.
4. Connect the display cable to the display board and close the latch.
Next steps
1. Install the
.
After working inside your computer
.
System board
Removing the system board
Prerequisites
Before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
, whichever applicable.
Removing and installing components
51
