About this task
NOTE:
This procedure only applies for computers shipped with a 4-cell battery (64 Wh) installed.
The following image(s) indicate the location of the front speakers, 4-cell battery (64 Wh) and provides a visual representation of
the removal procedure.
Steps
1. Disconnect the front-speaker cable from the system board.
2. Remove the front-speaker cable from the routing guides on the system board and palm-rest and keyboard assembly.
3. Peel the tapes securing the front-speaker cable to the palm-rest and keyboard assembly.
4. Lift the speakers and its cable off the palm-rest and keyboard assembly.
Installing the front speakers, 4-cell battery (64 Wh)
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
NOTE:
This procedure only applies if you're installing the front speaker for a computer with a 4-cell battery (64 Wh)
installed.
The following image(s) indicate the location of the front speakers, 4-cell battery (64 Wh) and provides a visual representation of
the installation procedure.
28
Removing and installing components
