Charger Board
Dell™ Inspiron™ 1318 Service Manual
Removing the Charger Board
1.
2.
3.
Remove the screw that secures the charger board to the base of the computer.
4.
Lift the charger board away from the base of the computer.
Replacing the Charger Board
1.
Align the screw hole on the charger board with the screw hole on the base of the computer.
2.
Replace the screw that secures the charger board to the base of the computer.
3.
).
4.
Slide the battery into the battery bay, until it clicks into place.
CAUTION:
Before performing the following procedures, follow the safety instructions shipped with your computer.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of
the computer.
1
M2 x 3-mm screw
2
charger board
Summary of Contents for Inspiron 1318
