Dell EMC XC Core XC450, Installation And Service Manual

Page: 9 / 109

Table 2. Features available on the rear of the system (continued)
Item Ports, panels, or slots Icon Description
2 BOSS riser N/A Enables you to connect BOSS card.
3 PCIe expansion card riser
2c N/A Enables you to connect PCI Express expansion cards.
4 Power supply unit (PSU 1) Indicates the PSU.
5 Power supply unit (PSU
2) Indicates the PSU.
6
System identification
button Press the system ID button:
● To locate a particular system within a rack.
● To turn the system ID on or off.
To reset iDRAC, press and hold the button for 16 seconds.
NOTE:
● To reset iDRAC using system ID, ensure that the system ID
button is enabled in the iDRAC setup.
● If the system stops responding during POST, press and hold
the system ID button (for more than five seconds) to enter
the BIOS progress mode.
8
USB 3.0 port This port is USB 3.0-compliant.
9 USB 2.0 port This port is USB 2.0-compliant.
10 iDRAC dedicated port
Enables you to remotely access iDRAC. For more information,
see the iDRAC User’s Guide at
https://www.dell.com/
poweredgemanuals .
12 NIC ports The NIC ports that are integrated on the system board provide
network connectivity. These NIC ports can also be shared with
iDRAC when iDRAC network settings are set to shared mode.
For more information about the ports, see the Dell EMC XC Core XC450 Technical Specifications on the product documentation
page.
Dell EMC XC Core XC450 system overview 9