Figure 91. Installing the system board
Next steps
1. Replace the following components:
a.
NOTE:
The TPM Module must be replaced only while installing new system board.
b.
c.
d.
e.
f.
g.
h.
i.
2. Reconnect all cables to the system board.
NOTE:
Ensure that the cables inside the system are routed along the chassis wall and secured using the cable securing
bracket.
3. Ensure that you perform the following steps:
a. Use the Easy Restore feature to restore the Service Tag. See the
Restoring the system by using the Easy Restore
b. If the service tag is not backed up in the backup flash device, enter the system service tag manually.
c. Update the BIOS and iDRAC versions. Re-enable the Trusted Platform Module (TPM). See the
section.
4. If you are not using Easy restore, import your new or existing iDRAC Enterprise license. For more information, see the
iDRAC
User's Guide
available at
https://www.dell.com/idracmanuals
.
5. Follow the procedure listed in
After working inside your system
.
Restoring the system using Easy Restore
The easy restore feature enables you to restore your service tag, license, UEFI configuration, and the system configuration data
after replacing the system board. All data is backed up in a backup flash device automatically. If BIOS detects a new system
board, and the service tag in the backup flash device, BIOS prompts the user to restore the backup information.
86
Installing and removing system components
Summary of Contents for EMC XC Core XC450
Page 1: ...Dell EMC XC Core XC450 Installation and Service Manual September 2021 ...
Page 13: ...Figure 11 Memory information Dell EMC XC Core XC450 system overview 13 ...
Page 14: ...Figure 12 Service information electrical overview 14 Dell EMC XC Core XC450 system overview ...
Page 15: ...Figure 13 Service information mechanical overview Dell EMC XC Core XC450 system overview 15 ...
