Figure 10. Removing and installing the system
1.
latch release lock
2. system cover
3. latch
Installing the system cover
Prerequisites
.
Steps
1.
Align the slots of the system cover with the tabs on the chassis.
2.
Press the cover release latch, and push the cover toward the front of the chassis until the latch locks
into place.
3.
Turn the latch release lock clockwise to the locked position.
4.
Install the optional bezel.
5.
Reconnect the system to its electrical outlet and turn the system on, including any attached
peripherals.
Inside the system
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
NOTE: Components that are hot-swappable are marked orange and touch points on the
components are marked blue.
45
