Convention
IDSDM indicator code
Description
D
Amber
Indicates that the card is offline, has failed, or is
write protected
E
Not lit
Indicates that the card is missing or is booting
Next steps
Follow the procedure listed in
After working inside your system
.
Installing the internal dual SD module
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
.
2.
Follow the procedure listed in
Before working inside your system
Steps
1.
Locate the IDSDM connector on the system board. To locate the IDSDM connector, see
.
2.
Align the connectors on the system board and the dual SD module.
3.
Push the dual SD module until it is firmly seated on the system board.
Next steps
1.
Install the SD vFlash media card(s). Temporarily label each SD card with its corresponding slot before
removal. Replace the SD card(s) into the same slots.
2.
Follow the procedure listed in
After working inside your system
.
Internal SD card
Removing an internal SD Card
Prerequisites
1.
2.
Follow the procedure listed in
Before working inside your system
NOTE: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by
the online or telephone service and support team. Damage due to servicing that is not authorized
by Dell is not covered by your warranty. Read and follow the safety instructions that came with the
product.
69