Dell Dimension 9200C Owner'S Manual Download

Page: 96 / 136

Removing and Installing Parts

Replacing the Computer Cover

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions located in the

Product Information Guide

Ensure that all cables are connected, and fold cables out of the way.

Gently pull the power cables toward you so that they do not get caught underneath the drives.

Ensure that no tools or extra parts are left inside the computer.

Install the cover:

Align the bottom of the cover with the tabs located along the bottom of edge of the computer.

Using the tabs as leverage, rotate the cover downward.

Snap the cover into place by pulling back on the cover release latch, and then releasing the latch
when the cover is properly seated.

Ensure that the cover is seated correctly before moving the computer to the upright position.

NOTICE:

To connect a network cable, first plug the cable into the network device and then plug it into the

computer.

Connect your computer and devices to electrical outlets, and turn them on.

book.book Page 96 Wednesday, August 9, 2006 2:32 PM

Summary of Contents for Dimension 9200C









































































































































Search results

Summary of Contents for Dimension 9200C

Reviews:

Related manuals for Dimension 9200C

Brands by name

Popular brands

Dell Dimension 9200C, Owner'S Manual

Search results

Summary of Contents for Dimension 9200C

Reviews:

Related manuals for Dimension 9200C

Brands by name

Popular brands