Dell Dimension 9200C Owner'S Manual Download

Page: 89 / 136

Removing and Installing Parts

Floppy Drive (Optional)

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions located in the

Product Information Guide

CAUTION:

To guard against electrical shock, always unplug your computer from the electrical outlet before

removing the cover.

Removing a Floppy Drive

Follow the procedures in "Before You Begin" on page 61.

Remove the CD/DVD drive (see "Removing a CD/DVD Drive" on page 81).

Pull up on the drive release latch and slide the drive toward the back of the computer.

Carefully, so as not to damage the attached interface cable, lift the drive away from the computer.

drive release latch

floppy drive

book.book Page 89 Wednesday, August 9, 2006 2:32 PM

Summary of Contents for Dimension 9200C









































































































































Search results

Summary of Contents for Dimension 9200C

Reviews:

Related manuals for Dimension 9200C

Brands by name

Popular brands

Dell Dimension 9200C, Owner'S Manual

Search results

Summary of Contents for Dimension 9200C

Reviews:

Related manuals for Dimension 9200C

Brands by name

Popular brands