Dell d400 - Latitude - Pentium M 1.3 GHz Service Manual Download

Page: 67 / 78

Flashing the BIOS:

Back to Contents Page

Flashing the BIOS

1. Ensure that the AC adapter is plugged in and that the main battery is installed properly.

NOTE:

If you use a BIOS update program CD to flash the BIOS, set up the computer to boot

from a CD before inserting the CD.

2. Insert the BIOS update program floppy disk or CD, and turn on the computer.

Follow the instructions that appear on the screen. The computer continues to boot and updates

the new BIOS. When the flash update is complete, the computer automatically reboots.

3. Press <F2> during POST to enter the system setup program.

4. Press <Alt> and <F> to reset the computer defaults.

5. Press <Esc>, select

Save changes and reboot

, and press <Enter> to save configuration

changes.

6. Remove the flash BIOS update program floppy disk or CD from the drive and restart the

computer.

Back to Contents Page

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LAPT...%20ok/Latitude/D400/D400_SERVICE_MANUAL/bios.htm6/21/2004 1:56:16 AM

Summary of Contents for d400 - Latitude - Pentium M 1.3 GHz















































































Search results

Summary of Contents for d400 - Latitude - Pentium M 1.3 GHz

Reviews:

Related manuals for d400 - Latitude - Pentium M 1.3 GHz

Brands by name

Popular brands

Dell d400 - Latitude - Pentium M 1.3 GHz, Service Manual

Search results

Summary of Contents for d400 - Latitude - Pentium M 1.3 GHz

Reviews:

Related manuals for d400 - Latitude - Pentium M 1.3 GHz

Brands by name

Popular brands