Dell d400 - Latitude - Pentium M 1.3 GHz Service Manual Download

Page: 43 / 78

Display:

Back to Contents Page

Display

Removing the Display Assembly

Replacing the Display Latch

Removing the Display Assembly

CAUTION:

Before performing the following procedures, read the safety instructions

in your

System Information Guide

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or

by periodically touching an unpainted metal surface (such as the back panel) on the computer.

1. Follow the instructions in "

Preparing to Work Inside the Computer

" to remove the battery and

prepare the computer for work.

2. Remove the battery.

3. Remove the

hard drive

4. Remove the

center control cover

5. Remove the two M2.5 x 6-mm screws next to each hinge.

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA.../Latitude/D400/D400_SERVICE_MANUAL/display.htm (1 of 4)6/21/2004 1:56:11 AM

Summary of Contents for d400 - Latitude - Pentium M 1.3 GHz















































































Search results

Summary of Contents for d400 - Latitude - Pentium M 1.3 GHz

Reviews:

Related manuals for d400 - Latitude - Pentium M 1.3 GHz

Brands by name

Popular brands

Dell d400 - Latitude - Pentium M 1.3 GHz, Service Manual

Search results

Summary of Contents for d400 - Latitude - Pentium M 1.3 GHz

Reviews:

Related manuals for d400 - Latitude - Pentium M 1.3 GHz

Brands by name

Popular brands