Dell d400 - Latitude - Pentium M 1.3 GHz Service Manual Download

Page: 52 / 78

Cooling Fan:

Back to Contents Page

Cooling Fan

CAUTION:

Before performing the following procedures, read the safety instructions

in your

System Information Guide

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or

by periodically touching an unpainted metal surface (such as the back panel) on the computer.

1. Follow the instructions in "

Preparing to Work Inside the Computer

" to remove the battery and

prepare the computer for work.

2. Remove any installed

memory modules

, smart card,

modem

, or PC Card.

3. Remove the

4. Remove the

5. Remove the

6. Remove the

7. Remove the fan cable from the fan extender cable that runs under the system board.

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...20ok/Latitude/D400/D400_SERVICE_MANUAL/fan.htm (1 of 2)6/21/2004 1:56:13 AM

Summary of Contents for d400 - Latitude - Pentium M 1.3 GHz















































































Search results

Summary of Contents for d400 - Latitude - Pentium M 1.3 GHz

Reviews:

Related manuals for d400 - Latitude - Pentium M 1.3 GHz

Brands by name

Popular brands

Dell d400 - Latitude - Pentium M 1.3 GHz, Service Manual

Search results

Summary of Contents for d400 - Latitude - Pentium M 1.3 GHz

Reviews:

Related manuals for d400 - Latitude - Pentium M 1.3 GHz

Brands by name

Popular brands