manualshive.com logo in svg

Dell d400 - Latitude - Pentium M 1.3 GHz, Service Manual, Page: 65 / 78

Share
Download
Dell d400 - Latitude - Pentium M 1.3 GHz Service Manual Download Page 65

Reserve Battery: 

Back to Contents Page

 

Reserve Battery 

 

CAUTION: 

Before performing the following procedures, read the safety instructions 

in your 

System Information Guide

.

NOTICE: 

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or 

by periodically touching an unpainted metal surface (such as the back panel) on the computer. 

1.  Follow the instructions in "

Preparing to Work Inside the Computer

" to remove the main battery 

and prepare the computer for work. 

2.  Remove any installed 

memory modules

, smart card, 

modem

, or PC Card. 

3.  Remove the 

keyboard

. 

4.  Remove the 

display

. 

5.  Remove the 

palm rest

. 

NOTICE: 

Note the reserve battery location before you remove it so that you can put the 

replacement reserve battery in the same location. 

6.  Lift out the reserve battery, and disconnect it from the system board connector. 

 

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA.../Latitude/D400/D400_SERVICE_MANUAL/reserve.htm (1 of 2)6/21/2004 1:56:16 AM

Summary of Contents for d400 - Latitude - Pentium M 1.3 GHz















































































Reviews:

No comments