Dell d400 - Latitude - Pentium M 1.3 GHz Service Manual Download

Page: 24 / 78

Memory:

4. Replace the cover.

NOTICE:

If the cover is difficult to close, remove the module and reinstall it. Forcing the cover

to close may damage your computer.

5. Insert the battery into the battery bay, or connect the AC adapter to your computer and an

electrical outlet.

6. Turn on the computer.

As the computer boots, it detects the additional memory and automatically updates the system

configuration information.

To confirm the amount of memory installed in the computer:

●

In the Microsoft

Windows

XP operating system,

click the

Start

button, click

Help and

Support

, and then click

Computer Information

●

In Windows 2000

, right-click the

My Computer

icon on your desktop, and then click the

General

tab.

Installing a Memory Module Under the Keyboard

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/L.../Latitude/D400/D400_SERVICE_MANUAL/memory.htm (4 of 6)6/21/2004 1:56:06 AM

Summary of Contents for d400 - Latitude - Pentium M 1.3 GHz















































































Search results

Summary of Contents for d400 - Latitude - Pentium M 1.3 GHz

Reviews:

Related manuals for d400 - Latitude - Pentium M 1.3 GHz

Brands by name

Popular brands

Dell d400 - Latitude - Pentium M 1.3 GHz, Service Manual

Search results

Summary of Contents for d400 - Latitude - Pentium M 1.3 GHz

Reviews:

Related manuals for d400 - Latitude - Pentium M 1.3 GHz

Brands by name

Popular brands