Dell D11S Service Manual Download Page 8

Page: 8 / 127

Technology and components

This chapter details the technology and components available in the system.

Topics:

•

•

•

•

•

•

Advantages of DisplayPort over USB Type-C

Processor

NOTE:

Processor numbers are not a measure of performance. Processor availability is subject to change and may vary

by region/country.

Table 1. 9th Generation Intel Core Processor specifications

Type

UMA Graphics

lntel Core Processor i3 - 9300 (4
Cores/8MB/4T/up to 4.3GHz/65W)

Intel UHD Graphics 630

lntel Core Processor i5 - 9500 (6
Cores/9MB/6T/up to 4.4GHz/65W)

Intel UHD Graphics 630

Intel Core Processor 5 - 9600 (6
Cores/9MB/6T/up to 4.6GHz/95W)

Intel UHD Graphics 630

Intel Core Processor i7 - 9700 (8 Cores/
12MB/8T/up to 4.9GHz/95W)

Intel UHD Graphics 630

Intel Core Processor i9 - 9900 (8 Cores/
16MB/16T/up to 5.0GHz/95W)

Intel UHD Graphics 630

Intel Pentium Gold G5420 (2 Cores, 4MB
Cache, 3.8GHz)

Intel UHD Graphics 630

Intel Xeon E Processor E-2224 (4 Core,
8MB Cache, 3.4GHz, 4.6GHz Turbo)

Intel Xeon E Processor E-2224G (4 Core,
8MB Cache, 3.5GHz, 4.7GHz Turbo)

Intel UHD Graphics 630

Intel Xeon E Processor E-2236 (6 Core,
8MB Cache, 3.4GHz, 4.8GHz Turbo)

Intel Xeon E Processor E-2236G (6 Core,
8MB Cache, 3.6GHz, 4.8GHz Turbo)

Intel UHD Graphics 630

Table 2. 8th Generation Intel Core Processor specifications

Type

UMA Graphics

Intel Xeon E Processor E-2174G (4 Core HT,
8MB Cache, 3.8GHz, 4.7GHz)

Intel UHD Graphics 630

Intel Core Processor i7-8700 (6 Core, 12MB
Cache, 3.20GHz, 4.6GHz )

Intel UHD Graphics 630

Technology and components

Summary of Contents for D11S
































































































































Search results

Summary of Contents for D11S

Reviews:

Related manuals for D11S

Brands by name

Popular brands

Dell D11S, Service Manual

Search results

Summary of Contents for D11S

Reviews:

Related manuals for D11S

Brands by name

Popular brands