Dell Chromebook 3100, Service Manual

Page: 75 / 94

Table 13. Advanced help command
Command Purpose
route
[-n] [-6] Displays the routing tables.
set_apn
[-n <network-id>] [-u <username>] [-p
<password>] <apn>
Sets the APN to use when connecting to the network
specified by <network-id>. If <network-id> is not specified,
use the network-id of the currently registered network.
set_apn - c Clears the APN to be used, so that the default APN is used
instead.
set_arpgw
<true | false> Turns on the extra network state checking to make sure the
default gateway is reachable.
set_cellular_ppp [-u <username>] [-p <password>] Sets the PPP username and/or password for an existing
cellular connection. If neither -u nor -p is provided, this shows
the existing PPP username for the cellular connection.
set_cellular_ppp -c Clears any existing PPP username and PPP password for an
existing cellular connection.
sound <command> <argument> Low level sound configuration. Can be used to play/record
audio samples and enable beam forming on Pixel.
sound
beamforming <on|off > will enable/disable the feature.
sound record [duration] will start recording. sound play
<filename> plays the recorded audio samples
storage_status Reads storage device SMART health status, vendor attributes,
and error logs.
storage_test_1 Performs a short offline SMART test.
storage_test_2 Performs an extensive readability test.
syslog
<message> Logs a message to system log.
tpcontrol
{status | taptoclick [on|off] sensitivity [1-5] | set
<property>< value>} tpcontrol {syntp [on|off]}
Allows the user to manually adjust advanced touchpad
settings.
tracepath
[-n] <destination>[/port] Traces the path/route to a network host.
update_over_cellular
[enable|disable] Enables or disables the auto updates over cellular networks.
Run without arguments to see the current state.
upload crashes
Uploads available crash reports to the crash server.
wpa_debug
[<debug_level>] [--help] [--list_valid_level] [--
reset]
Sets the wpa_supplicant debugging level.
xset m
[acc_mult[/acc_div] [thr]] xset m default Tweaks the mouse acceleration rate.
xset r rate
[delay [rate]] Tweaks the autorepeat rates. The delay is the number of
milliseconds before autorepeat starts. The rate is the number
of repeats per second.
xset r
[keycode] < on|off > Turns autorepeat on/off. If a keycode is specified, it affects
only that key. If not specified, it affects global behavior.
Chrome commands
Chrome:// pages contain experimental features, diagnostic tools, and detailed statistics. They are hidden in Chrome's user
interface.
Chrome://about page lists all Chrome's internal pages. To view all the commands, type chrome://about in the
Chrome browser URL as shown below:
Troubleshooting 75