Dell Chromebook 3100 Service Manual Download Page 68 | Manualshive

Page: 68 / 94

background image

3. Select your Bluetooth status in the menu that appears.

4. If Bluetooth is disconnected, click the disconnected icon.

or click Enable Bluetooth in the menu. Your Chromebook will

automatically begin scanning for available Bluetooth devices.

5. Pick the device you want to add from the list of available Bluetooth devices and click Connect.
6. Follow the instructions on the screen to connect your Bluetooth device.

●

If you are connecting a mouse, no PIN is normally required. If you are prompted for a PIN, enter the PIN for your mouse
using your Chrome device's keyboard.

●

If you are connecting a keyboard, enter the randomly generated PIN on the keyboard you wish to pair and press Enter.

To confirm that your Bluetooth device is connected, check the Bluetooth status. You should see your device listed there.

NOTE:

Just got your Chromebook or Chromebox? If you are turning on your chrome device for the first time and you have

a Bluetooth device nearby that is also turned on, your chrome device may automatically detect the device and show you
steps to pair it. You will see these instructions only if your chrome device does not already have a similar device connected
or its functionality is not built in, like a keyboard or trackpad.

68

Technology and components

«
...
66
67
68
69
70
...
»

Summary of Contents for Chromebook 3100































































































Reviews:

No comments

Related manuals for Chromebook 3100

IntelliStation E Pro 6836

Brand: IBM Pages: 156

Brand: Wyse Pages: 114

Brand: Kontron Pages: 68

Brand: Intel Pages: 10

Brand: Advanced Micro Computers Pages: 77

Qosmio G50 Series

Brand: Toshiba Pages: 446

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brand: Sony Pages: 2

VPCL117FX - Vaio L Series All-in-one Touch Screen

Brand: Sony Pages: 2

VPCL112GX - Vaio L Series All-in-one Touch Screen

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brand: Sony Pages: 3

Brand: Sony Pages: 127

Brand: Sony Pages: 128

Brand: Sony Pages: 142

Brand: Sony Pages: 141

Brand: Sony Pages: 132

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands