5. Connect the 30-pin and 40-pin IO board cables and close the latch to secure it to the IO board [2].
Next steps
1. Install the
.
2. Install the
.
3. Install the
.
4. Follow the procedure in
after working inside your computer
.
Keyboard lattice and Keyboard
Removing the keyboard
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
3. Remove the
4. Remove the
.
Steps
1. Disconnect the keyboard cable from the connector on the system board [1].
2. Lift the computer and open the LCD fully [2].
34
Removing and Installing
Summary of Contents for Chromebook 3100 2-in-1
