Next steps
1. Install the
.
2. Install the
3. Install the
4. Install the
.
5. Install the
.
6. Install the
.
7. Follow the procedure in
after working inside your computer
.
Display hinges
Removing display hinge
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
3. Remove the
4. Remove the
.
5. Remove the
.
6. Remove the
.
Steps
1. Rotate the left hinge and hinge cap upwards to the display cover as shown in the image below.
NOTE:
Make sure you rotate only the hinges to the unlock the position, the hinge caps will not rotate until the hinges
are in the unlock position.
2. Pull the display cable and the rubber stopper out of the left hinge.
66
Removing and Installing
Summary of Contents for Chromebook 3100 2-in-1
