Command
Purpose
ssh_forget_host
Removes a host from the list of known ssh hosts. This command
displays a menu of known hosts and prompts for the host to
forget.
top
Sets the chaps debug logging level. No arguments start verbose
logging
Table 12. Advanced help command
Command
Purpose
battery_test
[<test length>]
Tests the battery discharge rate for a given number of seconds. No
argument defaults to a 300 s test.
bt_console
[<agent capability>]
Enters a Bluetooth debugging console. The
Optional
argument
specifies the capability of a pairing agent the console provides; see
the
Bluetooth Core
specification for valid options.
chaps_debug
[start|stop|<log_level>]
Sets the chaps debug logging level. No arguments will start
verbose logging.
connectivity
Shows connectivity status.
experimental_storage
<status|enable|disable>
Enables or disables experimental storage features.
ff_debug
[<tag_expr>] [--help] [--list_valid_tags] [--reset]
Adds and removes flimflam debugging tags.
memory_test
Performs extensive memory testing on the available free memory.
modem
<command> [args...]
Interacts with the 3G modem. Run
modem help
for detailed help.
modem_set_carrier carrier-name
Configures the modem for the specified carrier.
network_diag
[--date] [--link] [--show-macs] [--wifi] [--help] [--
wifi-mon] <host>
Performs a suite of network diagnostics and saves a copy of the
output to your download directory
network_logging
<wifi|cellular|ethernet>
Enables a predefined set of tags useful for debugging the specified
device.
p2p_update
[enable | disable]
Enables or disables the peer-to-peer (P2P) sharing of updates over
the local network. This will both attempt to get updates from other
peers in the network and shares the downloaded updates with
them. Run this command without arguments to see the current
state.
rlz
< status | enable | disable>
Enables or disables RLZ.
rollback
Attempts to roll back to the previous update cached on your
system. Only available on non-stable channels and non-enterprise
enrolled devices. Please note that this will power wash your device.
route
[-n] [-6]
Displays the routing tables.
set_apn
[-n <network-id>] [-u <username>] [-p <password>]
<apn>
Sets the APN to use when connecting to the network specified by
<network-id>. If <network-id> is not specified, use the network-id
of the currently registered network.
set_apn - c
Clears the APN to be used, so that the default APN is used instead.
set_arpgw
<true | false>
Turns on the extra network state checking to make sure the
default gateway is reachable.
set_cellular_ppp
[-u <username>] [-p <password>]
Sets the PPP username and/or password for an existing cellular
connection. If neither -u nor -p is provided, this shows the existing
PPP username for the cellular connection.
set_cellular_ppp -c
Clears any existing PPP username and PPP password for an
existing cellular connection.
sound
<command> <argument>
Low level sound configuration. Can be used to play/record audio
samples and enable beam forming on Pixel.
sound beamforming
<on|off >
will enable/disable the feature.
sound record
Troubleshooting
77
Summary of Contents for Chromebook 3100 2-in-1
