Next steps
1. Install the
2. Install the
3. Install the
.
4. Install the
.
5. Follow the procedure in
after working inside your computer
.
Display assembly
Removing display assembly
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
3. Remove the
4. Remove the
.
Steps
1. Disconnect the EMR sensor cable [1].
2. Remove the single (M2.0x3.0) screw that secures the wireless bracket to the system board [2].
3. Lift the wireless bracket and disconnect the wireless antennas [3, 4].
50
Removing and Installing
Summary of Contents for Chromebook 3100 2-in-1
