Steps
The component you are left with is the palmrest.
NOTE:
The palmrest assembly cannot be further disassembled once all of the pre-removal parts procedures are
completed. If the touchpad frame, touchpad support bracket, touchpad mylar, touchpad module, touchpad cable,
conductive tape or thermal pad are malfunctioning and need to be replaced, replace the entire palm-rest assembly.
Next steps
1. Install the
2. Install the
3. Install the
.
4. Install the
.
5. Install the
.
6. Install the
.
7. Install the
.
8. Install the
.
9. Follow the procedure in
after working inside your computer
.
Removing and Installing
71
Summary of Contents for Chromebook 3100 2-in-1
