Advanced
Default: Enabled
USB Wake Support
Allows you to enable USB devices to
wake the computer from standby or to
disable the USB wake support feature.
Default: Disabled
NOTE: If USB PowerShare is
enabled, a device connected to
the USB PowerShare connector
may not wake the computer.
SATA Operation
Allows you to configure the operating
mode of the integrated SATA hard-
drive controller.
Default: AHCI
Adapter Warnings
Allows you to choose if the computer
should display warning messages when
you use AC adapters that are not
supported by your computer.
Default: Enabled
Function Key Behavior
Allows you to set function key or
multimedia key as the default function
key behavior.
Default: Function key
Express Charge
Allows you to charge your computer
battery using Standard Charge or
Express Charge mode.
Default: Express Charge
Touchpad Backlight
Allows you to set the touch pad
backlight to be on or in auto mode.
Battery Health
Displays the battery health.
Advanced-Miscellaneous Devices
External USB Ports
Allows you to disable or enable the
external USB ports.
Default: Enabled
USB debug
Allows you to enable or disable USB
port for Windows debugging.
Default: Disabled
142
Summary of Contents for Alienware 15
