Replacing the solid-state
drives
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling
the hard drive.
Procedure
1
Slide the solid-state drive into the solid-state drive slot.
2
Align the screw hole on the solid-state drive with the screw hole on the
computer base.
3
Replace the screw that secures the solid-state drive to the computer
base.
Post-requisites
Replace the
base panel
.
26
Summary of Contents for Alienware 15
