background image

Back to Contents Page

  

Adamo XPS™ Service Manual 

 

 

Information in this document is subject to change without notice. 

© 2009 Dell Inc. All rights reserved.

 

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. 

Trademarks used in this text: 

Dell,

 the 

DELL

 logo, 

Dell

 

Adamo,

 and 

XPS

 are trademarks of Dell Inc.; 

Bluetooth

 is a registered trademark owned by Bluetooth SIG, Inc. and is used 

by Dell under license; 

Intel and Centrino are

 registered trademarks and 

Core

 is a trademark of Intel Corporation in the U.S and other countries; 

Microsoft

 and 

Windows 

are either 

trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries;

 Blu-ray Disc

 is a trademark of the Blu-ray Disc Association. 

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any 
proprietary interest in trademarks and trade names other than its own. 

November 2009 Rev. A00 

Back to Contents Page

 

 

 

 

NOTE: 

A NOTE indicates important information that helps you make better use of your computer. 

 

CAUTION: 

A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. 

 

WARNING: 

A WARNING indicates a potential for property damage, personal injury, or death. 

Summary of Contents for Adamo XPS




























































Reviews: