manualshive.com logo in svg

Dell Adamo XPS, Service Manual

Share
Download
Dell Adamo XPS Service Manual Download Page 19

  

 

 

10.

Slide and lift the computer base away from the display assembly.  
 

 

Replacing the Display Assembly  

 

 

1.

Follow the instructions in 

Before You Begin

.  

 

 

  

2.

Place the computer base in position and replace the two screws that secure the display assembly to the computer base.  
 

 

  

3.

Route the antenna cables and tape them in place if required.  
 

 

  

4.

Connect the following cables to their corresponding connectors on the system board:  
 

l

 

display cable  

 

l

 

left I/O board cable 

 

l

 

battery power cable  

 

l

 

AC adapter power cable  

 

l

 

right I/O board cable  

 

 

  

5.

Replace the Bluetooth™ card (see 

Replacing the Bluetooth Card

).  

 

 

  

6.

Replace the WLAN card (see 

Replacing the WLAN Card

).  

 

 

  

7.

Replace the palm rest assembly (see 

Replacing the Palm Rest Assembly

).  

 

 

 

8.

Replace the computer battery (see 

Replacing the Computer Battery

).  

 

 

 

Back to Contents Page

 

 

 

1 

screws (2) 

 

NOTE: 

Remove the service tag panel if you are replacing the display assembly (see 

Removing the Service Tag Panel

).

 

NOTE: 

Replace the service tag panel if you are replacing the display assembly (see 

Replacing the Service Tag Panel

).

 

CAUTION: 

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may 

result in damage to the computer.

Summary of Contents for Adamo XPS




























































Reviews:

No comments

Brands by name

Popular brands

Load more brands