manualshive.com logo in svg

Dell Adamo XPS, Service Manual

Share
Download
Dell Adamo XPS Service Manual Download Page 31

2.

Align the notch in the memory module with the tab in the memory module connector.  
 

 

  

3.

Slide the module firmly into the slot at a 45-degree angle, and press the other end of the module down until it clicks into place. If you do not hear the 
click, remove the module and reinstall it.  
 

 

 

4.

Replace the palm rest assembly (see 

Replacing the Palm Rest Assembly

).  

 

 

  

5.

Replace the computer battery (see 

Replacing the Computer Battery

).  

 

 

 

 

 

6.

Turn on the computer.  
 

As the computer boots, it detects the memory and automatically updates the system configuration information. 

To confirm the amount of memory installed in the computer,  

Click 

Start 

 

®

 

Control Panel

®

 

System and Security

®

 

System

. 

Back to Contents Page

 

 

 

 

NOTE: 

If the memory module is not installed properly, the computer may not boot.

 

CAUTION: 

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may 

result in damage to the computer.

Summary of Contents for Adamo XPS




























































Reviews:

No comments

Brands by name

Popular brands

Load more brands