manualshive.com logo in svg

Dell 48 Port Gigabit Ethernet Switch, User Manual

Share
Download
Dell 48 Port Gigabit Ethernet Switch User Manual Download Page 360

360

Viewing Statistics

www

.dell.com | support.dell.com

Defining Device RMON Events

Use the 

RMON Events Control 

page to define RMON events. To open the 

RMON Events 

Control 

page, click 

Statistics/RMON

→

 RMON

→

 Events Control 

in the tree view. 

Figure 8-10.

RMON Events Control

The 

RMON Events Control 

page contains the following fields: 

Event Entry 

— Indicates the event.

Community

 — Community to which the event belongs.

Description

 — User-defined event description.

Type 

— Describes the event type. Possible values are:

Log

 — Event type is a log entry.

Trap

 — Event type is a trap.

Log and Trap

 — Event type is both a log entry and a trap.

None 

— There is no event.

Time

 — Time when the event occurred.

Owner

 — The device or user that defined the event.

Remove 

— When checked, removes the event from the 

RMON Events Table

.

Summary of Contents for 48 Port Gigabit Ethernet Switch



















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands