manualshive.com logo in svg

Dell 48 Port Gigabit Ethernet Switch, User Manual

Introducing the Dell 48 Port Gigabit Ethernet Switch - the perfect solution for expanding your network capabilities. With lightning-fast speeds and reliable performance, this device is ideal for both small businesses and large enterprises. Access the comprehensive User Manual for free, simply download it from manualshive.com, and unlock the full potential of your Dell switch.

Share
Download
background image

Configuring Switch Information

261

•

Only one destination port can be defined.

The following restrictions apply to ports configured to be source ports:

•

Source Ports cannot be a LAG member.

•

Ports cannot be configured as a destination port.

•

Up to 8 source ports are supported.

To open the 

Port Mirroring

 page, click 

Switch 

→

 Ports 

→

 Port Mirroring 

in the tree view. 

 

NOTE: 

When a port is set to be a target port for a port-mirroring session, all normal operations on it 

are suspended. This includes Spanning Tree and LACP.

Figure 7-18.

Port Mirroring

The 

Port Mirroring 

page contains the following fields: 

Destination Port

 — The port number to which port traffic is copied.

Transmit Packets 

— Defines the how the packets are mirrored. The possible field values are: 

Untagged 

— Mirrors packets as untagged vlan packets. This is the default value. 

Tagged 

— Mirrors packets as tagged vlan packets.

Type

 — Indicates if the mirrored packets are RX, TX, or both RX and TX. 

Status

 — Indicates if the port is currently monitored (

Active

) or not monitored (

Ready

).

Remove

 — When selected, removes the port mirroring session. 

Summary of Contents for 48 Port Gigabit Ethernet Switch



















































































































































































































































































































































































































Reviews:

No comments

Related manuals for 48 Port Gigabit Ethernet Switch

FAAC T10E Quick Start Manual preview
T10E
Brand: FAAC Pages: 2
Xunison Hub M50 Mesh Cube Quick Start Manual preview
Hub M50 Mesh Cube
Brand: Xunison Pages: 11
Adler ASM512 Installation, Maintenance And Operating Manual Instruction preview
ASM512
Brand: Adler Pages: 8
Dell EMC PowerSwitch Z9332F-ON Setup Manual preview
PowerSwitch Z9332F-ON
Brand: Dell EMC Pages: 16
UfiSpace S9180-32X Hardware Installation Manual preview
S9180-32X
Brand: UfiSpace Pages: 25
Equip Vision 332702 Manual preview
Vision 332702
Brand: Equip Pages: 10
Fairchild FPS FSDH0265RN Manual preview
FPS FSDH0265RN
Brand: Fairchild Pages: 20
Ruby Tech GS-2108C User Manual preview
GS-2108C
Brand: Ruby Tech Pages: 254
T1V ThinkHub Pro Quick Start Manual preview
ThinkHub Pro
Brand: T1V Pages: 2
Dahua VTNS1006A-2 User Manual preview
VTNS1006A-2
Brand: Dahua Pages: 12
Labgear HDS3K User Manual preview
HDS3K
Brand: Labgear Pages: 8
Konig CMP-KVMSWIT50 Manual preview
CMP-KVMSWIT50
Brand: Konig Pages: 40
Omron D4JL Series Manual preview
D4JL Series
Brand: Omron Pages: 31
3onedata ICS5400PTP-12GT12GS4XS Installation preview
ICS5400PTP-12GT12GS4XS
Brand: 3onedata Pages: 3
NETGEAR GS305Pv2 Installation Manual preview
GS305Pv2
Brand: NETGEAR Pages: 2
AEB 725A Assembly & Instruction Manual preview
725A
Brand: AEB Pages: 10
3onedata IES2010 Series Quick Installation Manual preview
IES2010 Series
Brand: 3onedata Pages: 2
Quintum Tenor BX Product Manual preview
Tenor BX
Brand: Quintum Pages: 79

Brands by name

Popular brands

Load more brands