manualshive.com logo in svg

Dell 48 Port Gigabit Ethernet Switch, User Manual

Share
Download
Dell 48 Port Gigabit Ethernet Switch User Manual Download Page 130

130

Configuring System Information

www

.dell.com | support.dell.com

Viewing the Device Login History

The 

Login History 

page contains information for viewing and monitoring device utilization, 

including the time the user logged in and the protocol used to log on to the device.

To open the 

Login History 

page, click 

System

→ 

Logs

→

 Login History 

in the tree view.

Figure 6-20.

Login History

The 

Login History 

page contains the following fields: 

User Name 

— Contains a user-defined device user name list.

Login History Status 

— Indicates if password history logs are enabled on the device. 

Login Time 

— Indicates the time the selected user logged on to the device.

User Name 

— Indicates the user that logged on to the device.

Protocol 

— Indicates the means by which the user logged on to the device.

Location 

— Indicates the IP address of the station from which the device was accessed.

Viewing Login History

1

Open the 

Login History 

page.

2

Select a user in the 

User Name

 field. 

3

Click 

Apply Changes

. 

The login information for the selected user is displayed. 

Summary of Contents for 48 Port Gigabit Ethernet Switch



















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands