manualshive.com logo in svg

Dell 48 Port Gigabit Ethernet Switch, User Manual

Share
Download
Dell 48 Port Gigabit Ethernet Switch User Manual Download Page 302

302

Configuring Switch Information

www

.dell.com | support.dell.com

The following is an example of the CLI commands:

VLAN Port Membership Table

The 

VLAN Port Membership Table

 contains a 

Port Table

 for assigning ports to VLANs. Ports are 

assigned to a VLAN by toggling through the 

Port Control

 settings. Ports can have the 

following values:

The 

VLAN Port Membership Table 

displays the ports and the ports states, as well as LAGs.

Assigning Ports to a VLAN Group

1

Open the 

VLAN Membership

 page. 

2

Click the 

VLAN ID

 or 

VLAN Name

 option button and select a VLAN from the drop-down 

menu.

3

Select a port in the 

Port Membership Table

, and assign the port a value. 

4

Click 

Apply Changes

. 

The port is assigned to the VLAN group, and the device is updated.

console(config)# 

vlan database

console(config-vlan)# 

vlan

 1972

console(config-vlan)# 

end

console(config)# 

interface

 

vlan

 1972

console(config-if)# 

name

 Marketing

console(config-if)# 

end

Table 7-81.

VLAN Port Membership Table

Port Control

Definition

 

T

The interface is a member of a VLAN. All packets 
forwarded by the interface are tagged. The packets 
contain VLAN information.

U

The interface is a VLAN member. Packets 
forwarded by the interface are untagged.

F

The interface is denied membership to a VLAN.

Blank

The interface is not a VLAN member. Packets 
associated with the interface are not forwarded.

Summary of Contents for 48 Port Gigabit Ethernet Switch



















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands