manualshive.com logo in svg

Dell 48 Port Gigabit Ethernet Switch, User Manual

Share
Download
Dell 48 Port Gigabit Ethernet Switch User Manual Download Page 209

Configuring System Information

209

SNMPv1,2 

— SNMP versions 1 and 2 are enabled for the selected recipient. Define the following 

fields for SNMPv1 and SNMPv2:

Community String (1-20 Characters) 

— Identifies the community string of the trap 

manager.

Notification Version 

— Determines the trap type. The possible field values are: 

SNMP V1 

— SNMP Version 1 traps are sent.

SNMP V2 

— SNMP Version 2 traps are sent.

SNMPv3 

— SNMPv3 is used to send and receive traps. Define the following fields for SNMPv3: 

User Name 

— The user to whom SNMP notifications are sent.

Security Level 

— Defines the means by which the packet is authenticated. The possible field 

values are:

No Authentication 

—

 

The packet is neither authenticated nor encrypted.

Authentication 

— 

The packet is authenticated.

Privacy 

— 

The packet is both authenticated and encrypted.

UDP Port (1-65535) 

— The UDP port used to send notifications. The default is 162.

Filter Name 

— Includes or excludes SNMP filters.

Timeout (1-300) 

— The amount of time (seconds) the device waits before resending informs. 

The default is 15 seconds.

Retries (1-255) 

— The amount of times the device resends an inform request. The default is 3.

Remove Notification Recipient 

— When checked, removes selected notification recipients.

Adding a new Trap Recipients

1

Open 

Notification Recipients

 

page.

2

Click 

Add.

The

 Add Notification Recipients

 page opens:

Summary of Contents for 48 Port Gigabit Ethernet Switch



















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands