manualshive.com logo in svg

Dell 48 Port Gigabit Ethernet Switch, User Manual

Share
Download
Dell 48 Port Gigabit Ethernet Switch User Manual Download Page 214

214

Configuring System Information

www

.dell.com | support.dell.com

Destination File Name 

— The destination file type to which the file is downloaded. The 

possible field values are:

Software Image 

— Downloads the Image file.

Boot Code 

— Downloads the Boot file.

Configuration Download 

TFTP Server IP Address 

— The TFTP Server IP Address from which the configuration files 

are downloaded.

Source File Name 

— Indicates the configuration files to be downloaded. 

Destination File Name

— The destination file to which the configuration file is downloaded. 

The possible field values are:

Running Configuration 

— Downloads commands into the Running Configuration file.

Startup Configuration — 

Downloads the Startup Configuration file, and overwrites it.

User Defined Backup Configuration 

— Downloads the user-defined Backup 

Configuration file, and overwrites it.

N

ew File Name 

— Downloads a new backup configuration file can be specified as the 

destination file. 

 

NOTE: 

The image file overwrites the non-active image. It is recommended to designate that the 

non-active image will become the active image after reset, and then to reset the device following the 
download.

During the Image file download a dialog box opens which displays the download progress. The window 
closes automatically when the download is complete.

Downloading Files

1

Open the 

File Download from Server

 page.

2

Define the file type to download.

3

Define the fields.

4

Click 

Apply Changes

. 

The software is downloaded to the device.

 

NOTE: 

To activate the selected Image file, reset the device. For information on resetting the device, 

see

Switching Between Stack Masters

.

Summary of Contents for 48 Port Gigabit Ethernet Switch



















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands