Dell 3010cn - Color Laser Printer Service Manual Download Page 637

Page: 637 / 638

8 – 21

Chapter 8 Printer Specifications

10.7 3

Party Mode

When life of toner cartridge has ended, the printer stops accepting print request (life of toner car-

tridge is counted by the counter in CRUM). Taking into consideration that some users use refilled

toner cartridges, the printer can accept print request by the user’s panel operation even if life of

toner cartridge has ended. When the mode has changed so that the printer does not stop even after

life of toner cartridge ends, the printer displays a message on the operation panel to inform the user

of the mode change. When the printer operates in this mode, print image quality is not guaranteed.

Also, remaining toner level is not displayed (as CRUM data can not be guaranteed).

10.8 Power Save Function

10.8.1 Power Save Mode

10.8.2 Transfer Time to Power Save Mode

10.8.3 Recovery from Power Save Mode

When the printer receives a print job or any button on the operation panel is pressed, the printer

recovers from the Power Save mode and enters the Ready mode.

Mode

Description

Power Save Mode (30W
or less)

Fusing: pause, Exposing: pause, Recording: pause

Mode Transfer

Transfer Time

Default

From Standby Mode to
Power Save Mode

Selectable from 1 to 60 minutes by 1 minute

15minutes

Summary of Contents for 3010cn - Color Laser Printer































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3010cn - Color Laser Printer

Reviews:

Brands by name

Popular brands

Dell 3010cn - Color Laser Printer, Service Manual

Search results

Summary of Contents for 3010cn - Color Laser Printer

Reviews:

Brands by name

Popular brands