manualshive.com logo in svg

Dell 3010cn - Color Laser Printer, Service Manual

Share
Download
Dell 3010cn - Color Laser Printer Service Manual Download Page 119

3 - 21

Chapter 3 Removal and Replacement Procedures (RRPs)

RRP1.3

LEVER-SW (PL 1.1.5)

[Removal]

1) Remove TOP COVER. (RRP 1.1)
2) Remove a screw (Silver, with a flange, tap, 8mm) that fixes COVER SPRING TOP (PL 1.1.19) 

to TOP COVER (PL 1.1.1).

3) Remove COVER SPRING TOP from TOP COVER.
4) Pull out SPRING-SW (PL 1.1.4) from the hole in TOP COVER.
5) Rotate LEVER-SW (PL 1.1.5) to match the cut side of shaft of LEVER-SW to the notched of 

TOP COVER and remove LEVER-SW together with SPRING-SW.

6) Remove SPRING-SW from LEVER-SW.

[Replacement]

1) Attach SPRING-SW to LEVER-SW.
2) Match the cut side of shaft of LEVER-SW to the notched of TOP COVER and attach LEVER-

SW together with SPRING-SW.

3) Insert SPRING-SW in the hole in TOP COVER.

Be sure to put SPRING-SW on LEVER-SW properly.

4) Attach COVER SPRING TOP in a way that the notch of COVER SPRING TOP meets the rib 

of TOP COVER.

5) Fix COVER SPRING TOP to TOP COVER using a screw. (Silver, with a flange, tap, 8mm)
6) Attach TOP COVER. (RRP 1.1)

Summary of Contents for 3010cn - Color Laser Printer































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands