Dell 3010cn - Color Laser Printer, Service Manual

Page: 398 / 638

3 - 300
Chapter 3 Removal and Replacement Procedures (RRPs)
RRP14.3 PLATE ASSY BOTTOM (PL 14.1.3)
[Removal]
1) Remove 500 SHEET PAPER TRAY. (RRP 14.1)
2) Slide LOCK LIFT R (PL 14.1.10) and LOCK LIFT L (PL 14.1.17) to release lock.
3) Release a hook of ROLL LINK (PL 14.1.11) fixed on the shaft of PLATE ASSY BOTTOM (PL
14.1.3) on both right and left sides, and remove ROLL LINK, LOCK LIFT R and LOCK LIFT
L.
4) Remove four screws (silver, tap, 6mm) that fix right and left side of PLATE ROLL STOPPER
500 (PL 14.1.9) on 500 SHEET PAPER TRAY (PL 14.1.1).
5) Remove the convex of PLATE ROLL STOPPER from the hole of 500 SHEET PAPER TRAY,
and remove the right and left side of PLATE ROLL STOPPER.
6) Push the hooks at two locations of CASSETTE 500 (PL 14.1.15) to release the front side of
PLATE ASSY BOTTOM.
7) Remove the convex of PLATE ASSY BOTTOM from the concave of PLATE SLIDE 500 (PL
14.1.16).
8) Spread the side of CASSETTE 500, pull out the shaft of PLATE ASSY BOTTOM from oval
hole in CASSETTE 500 and remove PLATE ASSY BOTTOM.
[Replacement]
1) Match the boss part on the rear side of PLATE ASSY BOTTOM (PL 14.1.3) to SPRING NF
(PL 14.1.8).
Check that the boss part on the rear side of PLATE ASSY BOTTOM is placed in SPRING
NF.
2) Spread the side of CASSETTE 500 (PL 14.1.15), insert the shaft of PLATE ASSY BOTTOM in
the oval hole in CASSETTE 500 and attach PLATE ASSY BOTTOM.
3) Attach the convex of PLATE ASSY BOTTOM to the concave of PLATE SLIDE 500 (PL
14.1.16) and fix the front of PLATE ASSY BOTTOM using the two hooks of CASSETTE 500.
Convex of PLATE ASSY BOTTOM should be engaged in concave of PLATE SLIDE 500.
4) Match the convex of PLATE ROLL STOPPER to the hole of 500 SHEET PAPER TRAY (PL
14.1.1) and attach the right and left side of PLATE ROLL STOPPER.
5) Fix the right and left of PLATE ROLL STOPPER to 500 SHEET PAPER TRAY using the four
screws (silver, tap, 6mm).
6) Attach LOCK LIFT R (PL 14.1.10), LOCK LIFT L (PL 14.1.17) and ROLL LINK (PL 14.1.11)
to the shaft of PLATE ASSY BOTTOM on both right and left sides, and fix a hook of ROLL
LINK in the groove of shaft of PLATE ASSY BOTTOM.
7) Push PLATE ASSY BOTTOM to lock LOCK LIFT R and LOCK LIFT L.
8) Attach 500 SHEET PAPER TRAY. (RRP 14.1)