manualshive.com logo in svg

Dell 3010cn - Color Laser Printer, Service Manual

Share
Download
Dell 3010cn - Color Laser Printer Service Manual Download Page 437

3 - 339

Chapter 3 Removal and Replacement Procedures (RRPs)

RRP14.21 ACTUATOR (PL 14.4.7)

[Removal]

1) Remove 500 SHEET PAPER TRAY. (RRP 14.1)
2) Remove 500 SHEET FEEDER LEFT COVER. (RRP 14.6)
3) Remove CLUTCH ASSY PH. (RRP 14.11)
4) Remove DRIVE ASSY FEED. (RRP 14.9)
5) Remove HOUSING ASSY FEED. (RRP 14.18)
6) Remove ROLL ASSY FEED. (RRP 14.23)
7) Remove SPRING ACTUATOR (PL 14.4.6) from the notched of HOUSING ASSY FEED.
8) Pull out the shaft of ACTUATOR (PL 14.4.7) from the hook of HOUSING ASSY FEED, and 

remove ACTUATOR together with SPRING ACTUATOR.

9) Remove SPRING ACTUATOR from ACTUATOR.

[Replacement]

1) Attach SPRING ACTUATOR to ACTUATOR.
2) Engage the shaft of ACTUATOR to the hook of HOUSING ASSY FEED, and attach 

ACTUATOR together with SPRING ACTUATOR.

3) Hook SPRING ACTUATOR to the notched of HOUSING ASSY FEED.

Be sure to securely hook SPRING ACTUATOR to the notches of ACTUATOR and 

HOUSING ASSY FEED.

4) Attach ROLL ASSY FEED. (RRP 14.23)
5) Attach HOUSING ASSY FEED. (RRP 14.18)
6) Attach DRIVE ASSY FEED. (RRP 14.9)
7) Attach CLUTCH ASSY PH. (RRP 14.11)
8) Attach 500 SHEET FEEDER LEFT COVER. (RRP 14.6)
9) Attach 500 SHEET PAPER TRAY. (RRP 14.1)

Summary of Contents for 3010cn - Color Laser Printer































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands