manualshive.com logo in svg

Dell 3010cn - Color Laser Printer, Service Manual

Share
Download
Dell 3010cn - Color Laser Printer Service Manual Download Page 102

3 - 4

Chapter 3 Removal and Replacement Procedures (RRPs)

1.2 Description of procedure

 

‰

[RRP X.Y “AAAAA”] attached at the front of the procedure shows that the name of parts to be 
assembled/disassembled is “AAAAA”.

 

‰

“(PL X.Y.Z)” attached at the end of parts name in the procedure shows that the parts 
corresponds to the plate (PL) “X.Y”, item “Z” of [Chapter 5 Parts list], and their shape and 
fitting position can be checked in [Chapter 5 parts list].

 

‰

Description of direction shown below is used in the procedure.

T

Front : Front direction when facing the front of device.

T

Rear : Rear direction when facing the front of device.

T

Left : Left direction when facing the front of device.

T

right : Right direction when facing the front of device.

Figure: Definition of Printer Orientation

 

‰

Description of “

‹

[In the case of specification ***]” in the procedure shows that the work is 

performed only on the device with relevant specification. (no work is performed on device with 
irrelevant specification.)

 

‰

“(RRP X.Y) used in or at the end of sentences in the procedure shows that related work 
procedure is described in [RRP X.Y].

 

‰

Screws in a diagram are supposed to be loosened and removed using a cross slot screwdriver, 
unless otherwise specified.

 

‰

Black arrow in a diagram shows the moving direction.  Moreover, the order number attached 
to the black arrows shows the order of movement.

 

‰

Refer to [Chapter 4 Plug/Jack (P/J) Connector Location] for the position of connector (P/J).

REAR

FRONT

LEFT

RIGHT

Leg_Sec03_001LA

Summary of Contents for 3010cn - Color Laser Printer































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands