Dell 3000cn Color Laser Printer Page 51 User Manual Download

Page: 51 / 194

When installing the supplied 64MB memory card, see "

Installing a Memory Card

10. Turn on the printer.

11. Make sure the optional duplex module is properly installed.

a. Press

Menu

b. Press until

Configure

appears, and then press or .

c. Press until

Reports

appears, and then press or .

Printer Settings

is displayed. Press .

The Printer Settings page is printed.

e. Verify that the optional duplex module is listed under

Printer Options

in the Printer Settings page.

If the optional duplex module is not listed, turn off the printer, unplug the power cable, and reinstall the optional

duplex module.

f. Verify the

Memory Capacity

under

General

in the Printer Settings page.

12. Update your driver by following the instructions. If the printer is on a network, update the driver for each client.

Windows XP/Server 2003

1. Click

Start

Printers and Faxes

2. Right-click this printer icon and select

Properties

3. Click the

Options

tab, and then select

Get Information from Printer

4. Click

Apply

, and then click

5. Close the

Printers and Faxes

folder.

Windows 2000/NT4.0

1. Click

Start

Settings

Printers

2. Right-click this printer icon and select

Properties

3. Click the

Options

tab, and then select

Get Information from Printer

4. Click

Apply

, and then click

5. Close the

Printers

folder.

Summary of Contents for 3000cn Color Laser Printer



































































































































































































Search results

Summary of Contents for 3000cn Color Laser Printer

Reviews:

Related manuals for 3000cn Color Laser Printer

Brands by name

Popular brands

Dell 3000cn Color Laser Printer, User Manual

Search results

Summary of Contents for 3000cn Color Laser Printer

Reviews:

Related manuals for 3000cn Color Laser Printer

Brands by name

Popular brands