Dell 3000cn Color Laser Printer User Manual Download Page 31

Page: 31 / 194

About Your Printer

The following illustrations show the standard Dell Laser Printer 3000cn, with optional duplex module, and an optional 250-

sheet tray module or 500-sheet tray module.

Standard

printer

Printer with options

1 Center

output tray

4 Optional duplex module

2 Operator

panel

5 Optional 250-sheet tray module (A4/Letter

cassette)
Optional 250-sheet tray module (Legal

cassette)
Optional 500-sheet tray module

NOTE:

Your printer can be equipped

with a maximum of two trays. You

can install the optional 250-sheet

tray module with the optional 250-

sheet tray module or the optional

250-sheet tray module with the

optional 500-sheet tray module.

3 Multipurpose

feeder

NOTE:

When you use the printer with the multipurpose feeder opened, do not locate the printer in direct sunlight.

Doing so may cause a malfunction or unnatural screen image.

Summary of Contents for 3000cn Color Laser Printer



































































































































































































Search results

Summary of Contents for 3000cn Color Laser Printer

Reviews:

Dell 3000cn Color Laser Printer, User Manual, Page: 31 / 194

Search results

Summary of Contents for 3000cn Color Laser Printer

Reviews: