Dell 3000cn Color Laser Printer Page 39 User Manual Download

Page: 39 / 194

2. Turn on the computer and the printer.

Connecting the Printer to the Network

To attach the printer to a network:

1. Make sure the printer, computer, and any other attached devices are turned off and unplugged.

2. Plug one end of a standard category 5 cable into a LAN drop or hub, and the other end into the Ethernet port on the

back of the printer. The printer automatically adjusts for the network speed.

1 Ethernet port

Turn On the Printer

1. Plug one end of the printer power cable into the socket at the back of the printer and the other end into a properly

grounded outlet.

2. Turn on the computer and the printer.

Summary of Contents for 3000cn Color Laser Printer



































































































































































































Search results

Summary of Contents for 3000cn Color Laser Printer

Reviews:

Related manuals for 3000cn Color Laser Printer

Brands by name

Popular brands

Dell 3000cn Color Laser Printer, User Manual

Search results

Summary of Contents for 3000cn Color Laser Printer

Reviews:

Related manuals for 3000cn Color Laser Printer

Brands by name

Popular brands