Dell 3000cn Color Laser Printer User Manual Download Page 89

Page: 89 / 194

Gateway Address

Protocol

Purpose:

To enable or disable each item.

The change becomes effective after the printer is turned off and then on again.

Values:

LPD

On*

Enables the LPD port.

Off

Disables the LPD port.

Port9100

On*

Enables the Port9100 port.

Off

Disables the Port9100 port.

FTP

On*

Enables the FTP port.

Off

Disables the FTP port.

SNMP UDP On*

Enables the UDP.

Off

Disables the UDP.

E-Mail Alert On*

Enables the E-Mail Alert feature.

Off

Disables the E-Mail Alert feature.

EWS

On*

Enables an access to

Dell Printer Configuration Web Tool

embedded in the printer.

Off

Disables an access to

Dell Printer Configuration Web Tool

embedded in the printer.

IP Filter

Purpose:

To specify the reception of data from certain IP addresses for blocking. You can set up to five IP addresses.

The change becomes effective after the printer is turned off and then on again.

Values:

Sets the IP address for Filter

Summary of Contents for 3000cn Color Laser Printer



































































































































































































Search results

Summary of Contents for 3000cn Color Laser Printer

Reviews:

Dell 3000cn Color Laser Printer, User Manual, Page: 89 / 194

Search results

Summary of Contents for 3000cn Color Laser Printer

Reviews: