Dell 3000cn Color Laser Printer User Manual Download Page 180

Page: 180 / 194

CAUTION:

To lift the printer safely and replace the optional 250-sheet tray module or 500-sheet tray

module requires two people to stand in front (operator panel side) and behind the printer and to lift at the

same time. Do not try to lift the printer from the sides.

CAUTION:

Make sure your fingers are not under the printer when you set it down.

NOTE:

You can use a maximum of two trays with your printer (the optional 250-sheet tray module and one additional

250-sheet tray module or 500-sheet tray module).

1. Turn off the printer and unplug the printer power cable.

2. Unlock the tray from the printer by removing the tray from the tray module and turning the locking mechanism, inside

the printer, as shown in the graphic.

3. Remove the printer from the tray.

CAUTION:

Lift the printer with two people, one facing the front of the printer (operator panel side) and the

other facing the back. Never try to lift the printer while facing its right and left sides.

Summary of Contents for 3000cn Color Laser Printer



































































































































































































Search results

Summary of Contents for 3000cn Color Laser Printer

Reviews:

Dell 3000cn Color Laser Printer, User Manual, Page: 180 / 194

Search results

Summary of Contents for 3000cn Color Laser Printer

Reviews: